Step-by-Step Guide to Fixing a Water Dispenser in Hyderabad

• In a cooler, chemical and biological contaminants (mainly microbiological) can get into the water. This system operates in conditions of high humidity and temperature, and its sanitary condition primarily depends on these conditions.
• The primary source of contamination is improper installation of the bottle. The cap label and heat shrink film must be removed before installation, as external contamination may occur during storage and transportation of the bottle.
• You should only install the bottle by touching the lid with clean hands. It is enough to install a bottle of water with dirty hands once for microorganisms to get into the cooler. Along with relatively harmless ones, microorganisms that cause various diseases can also get into the system. When the cooler is contaminated, a biofilm can develop on the internal surfaces, which is why we recommend periodic sanitization. Biological film is a formation consisting of bacteria attached to surfaces and secreting a thin layer of a particular substance that protects them from adverse environmental effects. Without removing the biofilm, it is impossible to get rid of microbiological contamination completely.

When is it necessary to carry out sanitary treatment?

Coolers located near windows can become contaminated with single-celled protozoan algae, which give the water a green colour.

To avoid the external environment’s influence on the quality of drinking water and to prevent the device’s premature failure, it is necessary to carry out its regular sanitary treatment with the help of Water dispenser repair in Hyderabad.

According to Indian and international standards, this procedure is recommended to be carried out once every 3-6 months, depending on the operating mode.

How does sanitization take place? 

Sanitary treatment of the cooler consists of treating the external and internal parts. Particular attention is paid to those elements that directly come into contact with drinking water. These are taps, parts of the needle holder cover, needle, separator, tanks, and connecting tubes. Biofilm is removed, and lime deposits (if any) on the walls of the tank and heating elements are also removed.

The treatment uses modern means that effectively wash and disinfect the cooler without harming the human body. Afterward, the device is washed with water.

Generally, servicing the device is not difficult if professionals do it. The most important thing is not to postpone cleaning. Specialists’ timely intervention will help keep the cooler clean and functional and the water fresh.

Where can I do it?

In our Water dispenser repair near me, 8; from 09:00 to 18:00 from Monday to Friday. 

We have our workshop for the repair and sanitization of coolers, purifiers, dispensers, water dispensers, and water pumps. The sanitization of products is carried out by experienced specialists and our own cleaning and disinfecting agents, providing complete treatment for viruses and bacteria, including COVID-2019 viruses. We have abandoned on-site sanitization at home since studies have shown that, in this case, it is not possible to thoroughly wash and treat all parts of the system without violating the technology of the procedure. 

• It is no less important during the COVID-19 epidemic to wash reusable water containers promptly (to avoid the accumulation of bacteria inside the container and not to expose bottles to sunlight – the water begins to “bloom” and “turn green”, forming pathogenic organisms inside. To avoid this, you can purchase colored covers for bottles from the REPAIR SERVICE BRO company
• Sanitary treatment will save your family from the danger of diseases from viruses, bacteria, and infections and destroy at the root any carriers of infection in your home that can be received through the water in the cooler.