How to Drain a Frame Pool

Nowadays, frame pools are found in most summer cottages and cottages. Such products provide comfort in the summer heat: swimming is equally enjoyable for children and adults. However, when buying, not every owner of an artificial reservoir knows how to care for the container, how to properly clean the bowl, and what to do with the water.

How to completely drain water from a frame pool is one of the key points that is important to know after purchasing and installing a swimming pool product.

Should I drain my frame pool for the winter?

One of the main rules that pool owners should know is that water should never be left for the winter. For proper storage, the frame pool structure must be dismantled during cold weather.

If you leave the bowl full, this will inevitably lead to the need to repair the walls – from temperature changes, the PVC cup package, which is inside the pool, can be damaged. From frost, such material often cracks and breaks. In addition, PVC can be damaged by ice formed in the folds of the package.

Another problem is long thawing. Many frame pools contain more than 1 ton of ice. When such a massive “icicle” begins to melt, it often takes at least a week. In this case, the melted water will still have to be drained and replaced – melted liquid is not suitable for swimming.

These rules regarding water apply not only to frame pools but also to inflatable pools.

Pro Tip: Need reliable pool water draining services in Cave Creek, AZ? Our experts ensure fast, efficient, and safe pool drainage. Contact us today for a hassle-free experience!

In what situations might draining be necessary?

In addition to removing liquid after the end of the swimming season, it is necessary to pour out water for the following reasons:

Turbidity and contamination of water in the bowl. Occurs in situations where filtration is not possible.
When substances unsafe for humans get into the bathing water. This happens rarely, but it does happen, especially after cleaning the walls with aggressive household chemicals.
For repair or repair. In some cases, the pool requires minor restoration, for which the water will still have to be removed.
In case the bowl is filled with rainwater. The pool should have clean water, as branches, leaves, and other debris often get inside along with the rainwater.

Frame seasonal pools of good quality are always equipped with one or more drain holes, through which water is drained. To remove liquid from the bowl, follow these instructions:

A hose (a regular garden hose, which is a must-have in every private plot) is connected to the drain hole using a special adapter. In rare cases, the adapter may not be included in the kit, in which case it must be purchased separately.
The other end of the hose is directed into a water receiver. This can be a well, a cesspool, or even a vegetable garden (provided that the pool does not receive an excessive amount of water).
The drain valve opens. After all the water has drained, you can disconnect the hose and perform the necessary actions (cleaning the walls, repairs, etc.).

How to drain residual water from a frame pool

After almost all the water has left the container, there is usually a small amount of liquid left at the bottom. You can push the remains out of the bowl with a regular tool, such as a mop, pushing it towards the drainage hole for draining.

You can completely remove water using a submersible pump. A small, inexpensive, and easy-to-use device is a very useful thing in the household: with the help of the product, it is easy not only to empty the pool but also to dry the flooded basement. At the same time, the pump allows you to transfer liquid from the bowl to any place, right up to the sewer.

Where to use wastewater

Knowing how to drain a frame pool completely, it is important to understand where the water can be used. Often, the waste liquid is sent to the sewer system. But not every site has one (especially if we are talking about a summer house).

It is worth considering that large volumes of water are often treated with special preparations to maintain cleanliness. For example, algin and desalgin are used to eliminate green turbidity, and limescale is eliminated with acetic and citric acid. There are also other means, such as chlorine tablets for disinfection against bacteria and viruses.

Based on this, when choosing where exactly to drain the water, it is important to focus on its composition:

Treatment with preparations. In this case, it is better to pour the water into a cesspool (septic tank), but not every pit can hold a large amount of water. The best solution is to equip a special water receiver.
Clean water without chemicals. If there is a natural reservoir on the site, this is where you can send the wastewater. In addition, the water can be used to water plants and irrigate the area. Which will be the best option during dry seasons?

Water containing any chemicals cannot be used for irrigation or discharge into natural bodies of water.

Additional tips

It is important to take into account that the volume of the drain pit, made specifically for water from the pool, should exceed the capacity of the bowl. If the water is drained into the sewer, the pipes should go at an angle to prevent the water from returning in the opposite direction (the drain pipe is equipped with a special valve). The liquid can drain more slowly or faster depending on the diameter of the drain hose or pipe. An inflatable pool is drained according to the same principle as a frame pool. It is enough to open a hole in the bottom of the bowl and remove the wastewater.

The price of frame pools can be quite high but with proper care and maintenance. Artificial reservoirs serve for decades, delighting children and adults with cool water in the hottest summer!

Read Other: Latest Trends in Swimming Pool Construction